Navigate technical challenges with confidence with our troubleshooting section. Explore comprehensive guides and Frequently Asked Questions to resolve issues and keep your systems running smoothly.
Explore our Frequently Asked Questions to find quick and helpful answers to common inquiries.
Thermolec is certified under CSA, CSA/US and UL standards. We also carry H-Stamp and National Board certifications for our electric boilers.
It is recommended that the minimum air flow across the elements is 300 FPM (1.52 L/S) for open element heaters and 500 FPM (2.53 L/S) for tubular/sheathed elements.
The pressure drop can be estimated by referring to the Pressure Drop Chart included in the technical notes document on our website. These values are under the guideline that the depth of the element frame is 10” (254mm).
Thermolec can provide thermostats with any given heater upon request. If a different thermostat is to be used, make sure that the output capabilities of the thermostat is compatible with what was ordered. • Active 0-10VDC signal for modulating heaters (Similar to Thermolec’s CTH-291) • Passive Thermistor output for modulating heaters (Similar to Thermolec’s DT-1040 and RT-1030) • Active 24VAC output for staged ON/OFF heaters (Similar to Thermolec’s CTH-010 or CTH-294) • Standard dry-contact thermostats for staged ON/OFF heaters.
The electronic air flow sensor was designed specifically for VAV and CAV applications where the air flow may be too low, even below the recommended air flow. This is to be used in collaboration with modulating controls.
If you can’t find the answers you’re looking for online, don’t worry. Our dedicated team is here to assist you, providing prompt and reliable support to address any inquiries or concerns you have.
2060 Lucien Thimens
Montreal, Quebec
H4R 1L1
map
+1 514-336-9130